Sarah likes them but i duno.
Saturday, January 30, 2016
Saturday, January 2, 2016
Cabinetry will be done in my shop, as much as possible in advance to reduce the downtime and save $. Cabinets will mostly be done euro-style using prefinished birch ply, however we're going to continue to use a kitchen "island" benchtop, using a narrower, but wider top.
for reference, here's the original kitchen. island here is 30"x60". We'll do something much longer and narrower at 24"x96"
Note above you can see a stack of 1/2" boards on teh tablesaw calming down after an initial milling. These are alderwood from my mom and dad's farm that my dad shipped to me a few years back. much of this wood had been infiltrated by boring insects, however I figured they had been gone. Only after I had milled all the drawer parts to final thickness did I notice some larvae still soft to the touch of my pocket knife. Much sorrow was expressed at this point. It's Alderwood from a wind storm that took down a large swath of trees on mom and dad's farm, and I wanted to use this wood somewhere important, and now it's been spoiled by the bugs. I'll set these boards aside for now. Heat kills them but I don't have the time now to bring everythign up to 150F in my kitchen oven.
I'll use Russian birch ply as drawer boxes for now.
Below, an initial frame test fitment. Double tenons for each rail that I will then reinforce with a 3/16" oak dowel for belt-suspenders treatment.
Reclaimed wood means pulling nails. Sometimes nails that had been sheared off by an infernal sawzall