strong arm

More time spent shaping the mahogany arms for the handle. Yep, another test in precision. First getting orthogonal holes drilled into the arms for the axle without a drill press! Dowling jig to the (approximate) rescue. And again with drilling pilot holes for tenon of handle. Now! How to make sure these bearings through the hull are collinear? Hmmm.. will have to think on this one...

sussing out a handle

A simple but sturdy handle for Ratka's sewing caddy. I tested 1/2" thick mahogany with a 3/8" oak dowel for sheer strength by holding onto the mahogany piece suspended while the protruding dowel hooked the edge of a stud in the garage wall. Should be sturdy enough for the pivoting arms. Then through-tennons holding the horizontal member to the pivoting arms, probably made of this fine old doug-fir i resawed here a while ago. Cardboard mockup of pivot arms below to test proportions...





I got these nice cast-off pieces of African Mahogany from the local hardwood place. Very handsome and a true joy to work with. These will be the "arms" connecting the handle to the carcass

Now the Fun Part

Planing the contours into the top of Ratka's sewing caddy was a joy.



Just roughing out the lines here for final glueup. Will continue shaping until I'm happy and there is no more tear-out in the wood.

lateralized capstone

As expected, this was the most challenging facet to arrange in the top. The side piece wedges will then be the last hard part in this roof.

Handy Bits

My favorite part has been repurposing the mahogany from Ratka's old sewing machine bench legs into small details of the new piece. It's a very well behaved wood and has a scent that I've taken a liking to.

E.g. the "daggers" securing the undercarriage to the sarcophagus needed some sort of tab for easier handling. To wit, I resawed some of this nice old wood and made a pair of little doo-dads for easy grabby:

more on sewing caddy hat

There is the plan, and then there is the object, and the former is a vague rudder pushing me towards the latter, but in the end I always end up somewhere in the mud. That's okay. Not all facets terminate to points in the same origin!





I Kind of knew this would be a reality of the caddy's top for this piece: coopering the top side and then expecting every wedge adjoining to the lateral sides to end up directly towards some ideal geometric point we call "origin" was something to scoff at. As long as the seams hold, it's good enough for me tho!

Now, onto sections 3 and 4 (in the works, but being glued up...

BRAAAAAAAP!!!

Scraped this short track link from Sideburn's web log. Guy named Dale Lineaweaver took some indoor short track videos of an event happening in Las Vegas this weekend. Epic DICE!

BRAAAAAAAAAAAAP!!!