Saturday, February 21, 2009

Top mold layup 1 complete

One step at a time! I used a slurry of milled glass fibers and epoxy to get into the nooks and crannies before doing the primary layup using 10oz fabric. Used a bunch of small rectangles of glass in a patchwork so that they'd lay down okay along the weir. Fingers are crossed.

1 comment :

  1. do you have a disk sander? it's a very handy item to help clean up the edges of F/G layups. you don't have to get so close to the itchy dust stuff. i've also found that a rough set of metal snips can knaw thru some of the edges too.

    ReplyDelete